Lime matte durable facade protection
Pure & Original Calx Kalei is a water-dilutable facade paint without structure.
It is a smooth paint that gives the facade an even effect. Calx Kalei is an extremely durable and moisture-regulating protective layer for the facade. The facade paint keeps the substrate permanently dry to a maximum depth.
Calx Kalei facade paint is mainly used for facades where a highly dirt-repellent or water vapor permeable facade paint is necessary. This type of paint is also extremely suitable as a protective layer for new and old Kalei paint.Find a reseller
An extremely durable and moisture-regulating protective layer for the facade
- 7-8 m2
- 4 hours
- Indoors & outdoors
- Max. 10% water
- 0 gr
- 140 gr
- Stir before use
Prepare well before you start painting. Depending on the substrate, prepare with a layer of WallFix. Apply Calx Kalei facade paint with a round or flat kalei brush, roller or airless.
- Colored with natural and organic pigments
- Lime matte effect
- Very environmentally friendly
- High coverage
- Water vapor permeable
- VOC free
- Solvent free
- Tension free
- Excellent moisture resistance
- Little to no odour
- Lotus effect
- Self cleaning
- Green resistant
Painted walls, newly plastered walls, old Kalei layers, aerated concrete, plasterboard, plaster blocks, lime plaster, cement plaster, synthetic plaster, absorbent natural stone, clean masonry, sand-lime brick, fiber cement panels, other mineral substrates.
More about Calx Kalei facade paint
Ready-made facade paint
You are looking for a beautiful facade finish. Otherwise you probably wouldn’t read this page this far.
Then you have probably already noticed that Kalei is usually offered in the dry powder form. You then have to mix it yourself with water and coloured pigments. A difficult and heavy job because all tubs that you make must always be 100% identical to prevent colour and other deviations.
The basic principle in the development of Pure & Original products is, among other things, that the paint is immediately ready for use and easy to apply. So is our Kalei. No messing with water or pigments, mix the Kalei yourself in tubs etc.
What is Kalei facade paint?
Kalei, also kaleien, is a technique that is in between plastering and painting. This ancient technique has been used for hundreds of years. Kalei is often used in restorations, but is also perfect for new-build homes. It gives your home a particularly beautiful appearance.
The Kalei is a treatment in which the surface becomes softer and less visible in structure. The surface is made rain and weather resistant in a sustainable way. In the past, Kalei was applied in many layers to get this specific effect, with Pure & Original Calx or Quartz Kalei 2 layers is sufficient for a nice covering result.
Required tools Calx Kalei facade paint
Would you like to apply Calx Kalei facade paint from Pure & Original? Then ensure the best result with the brushes and rollers from Pure & Original. The non-paint product range is available from our dealers.
Apply Kalei with a Kalei brush. This block brush contains a mix of different types of fibers that ensure good paint absorption and provide the typical authentic kalei structure.
The original Pure & Original can
Would you like to start working with Calx Kalei from Pure & Original? Avoid disappointment, buy your paint at one of our resellers, and don’t let other paint types tint with our colours. Only the original base and pigments can achieve our paints’ quality, abilities, look and feel. Replacing one of these elements with another brand, and the results will not be the same.
To be sure you buy our product, it has to be coloured and sold in the original Pure & Original can.